Skip to main content
Log in

Micro-injection moulding of polymer microfluidic devices

  • Review
  • Published:
Microfluidics and Nanofluidics Aims and scope Submit manuscript

Abstract

Microfluidic devices have several applications in different fields, such as chemistry, medicine and biotechnology. Many research activities are currently investigating the manufacturing of integrated microfluidic devices on a mass-production scale with relatively low costs. This is especially important for applications where disposable devices are used for medical analysis. Micromoulding of thermoplastic polymers is a developing process with great potential for producing low-cost microfluidic devices. Among different micromoulding techniques, micro-injection moulding is one of the most promising processes suitable for manufacturing polymeric disposable microfluidic devices. This review paper aims at presenting the main significant developments that have been achieved in different aspects of micro-injection moulding of microfluidic devices. Aspects covered include device design, machine capabilities, mould manufacturing, material selection and process parameters. Problems, challenges and potential areas for research are highlighted.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  • Abbott Laboratories (2009) i-STAT. Available at http://www.abbottpointofcare.com/istat. Accessed 2009

  • Angelov A, Coulter J (2004) Micromolding product manufacture—a progress report. In: Proceedings of the annual technical conference (ANTEC 2004), Chicago, IL, 16–20 May 2004

  • Angelov A, Coulter J (2007) A feasibility study for sub-100 nm polymer injection molding. In: Proceedings of the annual technical conference (ANTEC 2007), 6–11 May 2007

  • Angelov A, Coulter J (2008) The development and characterization of polymer microinjection molded gratings. Polym Eng Sci 48(11):2169–2177

    Article  Google Scholar 

  • Aufiero R (2005) The effect of process conditions on part quality in microinjection molding. In: Proceedings of the annual technical conference (ANTEC 2005), Boston, MA, 1–5 May 2005

  • Bartels Mikrotechnik GmbH (2009) Available at http://www.bartels-mikrotechnik.de. Accessed 2009

  • Becker H (2008) Microfluidics: a technology coming of age. Med Device Technol 19:21–24

    Google Scholar 

  • Becker H, Gärtner C (2000) Polymer microfabrication methods for microfluidic analytical applications. Electrophoresis 21(1):12–26

    Article  Google Scholar 

  • Becker H, Heim U (1999) Hot embossing as a method for the fabrication of polymer high aspect ratio structures. Sens Actuators A Phys 83(1):130–135

    Article  Google Scholar 

  • Becker H, Locascio L (2002) Polymer microfluidic devices. Talanta 56(2):267–287

    Article  Google Scholar 

  • Bibber D (2004) Micro molding challenges. In: Proceedings of the annual technical conference (ANTEC 2004), Chicago, IL, 16–20 May 2004

  • Bibber D (2005) Advanced micromolding applications. In: Proceedings of the annual technical conference (ANTEC 2005), Boston, MA, 1–5 May 2005

  • Bissacco G, Hansen H, Tang T, Fugl J (2005) Precision manufacturing methods of inserts for injection molding of microfluidic systems. ASPE spring topical meeting on precision micro/nano scale polymer based component and device fabrication, April 2005

  • Blattert C, Jurischka R, Schoth A, Kerth P Menz W (2004) Fabrication and testing of novel blood separation devices based on microchannel bend structures. Progress in biomedical optics and imaging. In: Proceedings of SPIE, Sydney, NSW, 13–15 December 2004

  • Boone T, HughFan Z, Hooper H, Ricco A, Tan H, Williams S (2002) Plastic advances microfluidic devices. Anal Chem 74(3)

  • Bourdon R (2003) Short cycles for injection moulded microfluidics parts. Kunsts Plast Eur 93(9): 9, 11+33

    Google Scholar 

  • Bourdon R, Schneider W (2002) A systematic approach to microinjection moulding. Business briefing: medical device manufacturing and technology 1–3

  • Catanzaro J, Kadykowski B (2002) Micro molding—“a new way”. In: Proceedings of the annual technical conference (ANTEC 2002), 3:2627–2633

  • Chang P, Hwang S, Lee H, Huang D (2007) Development of an external-type microinjection molding module for thermoplastic polymer. J Mater Process Technol 4/12; 184(1–3):163–172

    Google Scholar 

  • Chen S, Chang J, Chang Y, Chau S (2005) Micro injection molding of micro fluidic platform. In: Proceedings of the annual technical conference (ANTEC 2005), 1–5 May 2005

  • Clay J, Heggs R (2002) Material challenges in medical micromolding applications. In: Proceedings of the annual technical conference (ANTEC 2002), 5–9 May 2002

  • De Mello A (2002) Plastic fantastic? Lab Chip Miniatuarisation Chem Biol 2(2):31N–36N

    Article  Google Scholar 

  • Derdouri A, Ilinca F, Hétu J (2005) Microinjection molding of microstructures—experimental and numerical simulation. In: AIChE annual meeting, conference proceedings, Cincinnati, OH, 30 October–4 November 2005

  • Despa M, Kelly K, Collier J (1998) Injection molding using high aspect ratio microstructures mold inserts produced by LIGA technique. In: Proceedings of SPIE—the international society for optical engineering, Santa Clara, CA, USA, 21–22 September 1998

  • Erickson D, Li D (2004) Integrated microfluidic devices. Anal Chim Acta 507(1):11–26

    Article  Google Scholar 

  • Fassett J (1995) Thin wall molding: differences in processing over standard injection molding. In: Proceedings of the annual technical conference (ANTEC 1995), Boston, MA, USA, 7 May–11 October 1995

  • Fiorini GS, Chiu DT (2005) Disposable microfluidic devices: fabrication, function, and application. Biotechniques 38:429–446

    Article  Google Scholar 

  • Gadegaard N, Mosler S, Larsen NB (2003) Biomimetic polymer nanostructures by injection molding. Macromol Mater Eng 288(1):76–83

    Article  Google Scholar 

  • Gerlach A, Knebel G, Guber AE, Heckele M, Herrmann D, Muslija A et al (2002) Microfabrication of single-use plastic microfluidic devices for high-throughput screening and DNA analysis. Microsyst Technol 7(5–6):265–268

    Article  Google Scholar 

  • Giboz J, Copponnex T, Mélé P (2007) Microinjection molding of thermoplastic polymers: a review. J Micromech Microeng 17(6):R96–R109

    Article  Google Scholar 

  • Gottschlich N (2004) Production of plastic components for microfluidic applications. Business briefing: future drug discovery, 2004. http://www.touchbriefings.com/pdf/855/fdd041_greiner_tech.pdf. Accessed 2007

  • Grande JA (2006) Micro-thermoforming makes its debut. Plast Technol 52(11):37–41

    Google Scholar 

  • Greener J, Wimberger-Friedl R (2006) Precision injection molding: process, materials, and applications. Hanser Gardner Publications, Cincinnati

    Google Scholar 

  • Greenway G, Allan P, Bevis M, Hornsby P (2001) The mechanical testing of micro injection mouldings. In: Proceedings of the annual technical conference (ANTEC 2001), 5–9 May 2001

  • Greenway G, Allan P, Hornsby P (2003) The characterisation and physical testing of micro-mouldings. In: Proceedings of the annual technical conference (ANTEC 2003), Nashville, TN, 4–8 May 2003

  • Griffiths C, Dimov S, Brousseau E, Hoyle R (2007) The effects of tool surface quality in micro-injection moulding. J Mater Process Technol 189(1–3):418–427

    Google Scholar 

  • Griffiths C, Dimov S, Brousseau E, Chouquet C, Gavillet J, Bigot S (2008) Micro-injection moulding: surface treatment effects on part demoulding. In: 4M2008 proceedings. Whittles Publishing, UK, 9–11 September

  • Hanemann T, Pfleging W, Haußelt J, Zum K (2002) Laser micromaching and light induced reaction injection molding as suitable process sequence for the rapid fabrication of microcomponents. Microsyst Technol 7(5):209–214

    Article  Google Scholar 

  • Heckele M, Schomburg W (2004) Review on micro molding of thermoplastic polymers. J Micromech Microeng 14(3)

  • Heckele M, Guber A, Truckenmüller R (2006) Replication and bonding techniques for integrated microfluidic systems. Microsyst Technol 12(10–11):1031–1035

    Article  Google Scholar 

  • Hill S, Kämper K, Dasbach U, Döpper J, Ehrfeld W, Kaupert M (1995) An investigation of computer modelling for micro-injection moulding. In: Proceedings of microsym’95, September 1995

  • Hörr M (1997) Grundlagenuntersuchungen durch Strukturdefinition beim Mikrospritzgießen im Rahmen des LIGA-Prozesses. Fachhochschule Darmstadt, Darmstadt

    Google Scholar 

  • Ilinca F, Hétu J-F, Derdouri A (2004) Numerical simulation of the filling stage in the micro-injection molding process. In: Proceedings of the annual technical conference (ANTEC 2004), Chicago, IL, 16–20 May 2004

  • Jung J, Choi G, Kim D (2004) Experimental study on spray etching process in micro fabrication of lead frame. KSME Int J 18(12):2294–2302

    Google Scholar 

  • Kalima V, Pietarinen J, Siitonen S, Immonen J, Suvanto M, Kuittinen M et al (2007) Transparent thermoplastics: replication of diffractive optical elements using micro-injection molding. Opt Mater 30(2):285–291

    Article  Google Scholar 

  • Kelly A, Woodhead M, Coates P (2005) Comparison of injection molding machine performance. Polym Eng Sci 45(6):857–865

    Article  Google Scholar 

  • Kemmann O, Schaumburg C, Weber L (1999) Micro moulding behaviour of engineering plastics. In: Proceedings of SPIE—the international society for optical engineering, Bellingham, WA, USA, pp 464–471, 30 March–1 April 1999

  • Kemmann O, Weber L, Jeggy C, Magotte O (2000) Simulation of the micro injection molding process. In: Proceedings of the annual technical conference (ANTEC 2000), pp 576–580

  • Kim S, Trichur R, Beaucage G, Ahn C, Kim B (2002) New plastic microinjection molding technique for extremely tall plastic structures using remote infrared radiation heating method. In: Proceedings of the 10th solid-state sensor, actuator and microsystems workshop, 2–6 June, 2002

  • Kim D, Lee S, Ahn C, Lee J, Kwon T (2006) Disposable integrated microfluidic biochip for blood typing by plastic microinjection moulding. Lab Chip Miniaturisation Chem Biol 6(6):794–802

    Article  Google Scholar 

  • Kirkland C (2003) A first in micromold flow analysis. Injection Molding Mag

  • Kistler Instrument Corporation (2007) http://www.kistler.com. Accessed 27 Feb 2007

  • Klepárník K, Horký M (2003) Detection of DNA fragmentation in a single apoptotic cardiomyocyte by electrophoresis on a microfluidic device. Electrophoresis 24(2):3778–3783

    Article  Google Scholar 

  • Kukla C, Loibl H, Detter H, Hannenheim W (1998) Micro-injection moulding—the aims of a project partnership. Kunsts Plast Eur 88(9):6–7

    Google Scholar 

  • Lee B, Hwang C, Kim D, Kwon T (2008a) Replication quality of flow-through microfilters in microfluidic lab-on-a-chip for blood typing by microinjection molding. J Manuf Sci Eng Trans ASME 130(2):0210101–0210108

    Google Scholar 

  • Lee S, Kim S, Kang J, Ahn C (2008b) A polymer lab-on-a-chip for reverse transcription (RT)-PCR based point-of-care clinical diagnostics. Lab Chip Miniaturisation Chem Biol 8(12):2121–2127

    Article  Google Scholar 

  • Liou A, Chen R (2006) Injection molding of polymer micro- and sub-micron structures with high-aspect ratios. Int J Adv Manuf Technol 28(11–12):1097–1103

    Article  Google Scholar 

  • Little G, Tuttle R, Clark D, Corney J (1998) A feature complexity index. Proc Inst Mech Eng C J Mech Eng Sci 212(5):405–412

    Article  Google Scholar 

  • Liu M-K, Huang K-S, Chang J-Y, Wu C-H, Lin Y-C (2007) Using a CD-like microfluidic platform for uniform calcium alginate drug carrier generation. In: Proceedings of SPIE—the international society for optical engineering, San Jose, CA, 22–24 January 2007

  • Macintyre D, Thoms S (1998) The fabrication of high resolution features by mould injection. Microelectron Eng 41–42:211–214

    Article  Google Scholar 

  • Madou M, Lee L, Koelling K, Lai S, Koh C, Juang Y, et al (2001) Design and fabrication of polymer microfluidic platforms for biomedical applications. In: Proceedings of the annual technical conference (ANTEC 2001), vol 3, pp 2534–2538

  • Mair D, Geiger E, Pisano A, Fréchet J, Svec F (2006) Injection molded microfluidic chips featuring integrated interconnects. Lab Chip Miniaturisation Chem Biol 6(10):1346–1354

    Article  Google Scholar 

  • Majmundar R, Asthana A, Ghumman B, Barry C (2005) Comparison of predicted and experimental filling of micromolded parts. In: Proceedings of the annual technical conference (ANTEC 2005), Boston, MA, pp 1–5 May 2005

  • Martyn M, Whiteside B, Coates P, Allan P, Hornsby P (2001) Studies of the process–property interaction of the micromoulding process. In: Proceedings of the annual technical conference (ANTEC 2001), Brookfield Center, CT, USA, 5–9 May 2001

  • Martyn M, Whiteside B, Coates P, Allan P, Greenway G, Hornsby P (2003) Micromoulding: consideration of processing effects on medical materials. In: Proceedings of the annual technical conference (ANTEC 2003), Nashville, TN, 4–8 May 2003

  • Martyn M, Whiteside B, Coates, P, Allan P, Greenway G, Hornsby P (2004) Aspects of micromoulding polymers for medical applications. In: Proceedings of the annual technical conference (ANTEC 2004), Chicago, IL, 16–20 May 2004

  • Mazzeo A, Dirckx M, Hardt D (2007) Process selection for microfluidic device manufacturing. In: Proceedings of the annual technical conference (ANTEC 2007), 6–11 May 2007

  • Mehta N, Barry C, Bibber D, Tully D (2003) Validation of flow simulation for micromolded parts. In: Proceedings of the annual technical conference (ANTEC 2003), 4–8 May 2003, Nashville, TN

  • Micralyne Inc (2009) Available at http://www.micralyne.com. Accessed 2009

  • Microfluidic ChipShop GmbH (2009) Lab-on-a-Chip Catalogue 01/2009. Available at http://www.microfluidic-chipshop.com. Accessed 2009

  • Michaeli W, Gärtner R (2006) New demolding concepts for the injection molding of microstructures. J Polym Eng 26(2–4):161–177

    Google Scholar 

  • Michaeli W, Opfermann D (2005) Bonding strength in micro injection assembly moulding. In: Proceedings of the annual technical conference (ANTEC 2005), 1–5 May 2005, Boston, MA

  • Michaeli W, Opfermann D (2006a) Micro assembly injection moulding. Microsyst Technol 12(7):616–619

    Article  Google Scholar 

  • Michaeli W, Opfermann D (2006) Increasing the feasible bonding strength in micro assembly injection molding using surface modifications. In: Proceedings of the annual technical conference (ANTEC 2006), 7–11 May 2006, Charlotte, NC

  • Michaeli W, Spennemann A (2001) A new injection molding technology for micro parts. J Polym Eng 21(2–3):87–98

    Google Scholar 

  • Michaeli W, Ziegmann C (2003) Micro assembly injection moulding for the generation of hybrid microstructures. Microsyst Technol 9(6–7):427–430

    Article  Google Scholar 

  • Michaeli W, Rogalla A, Ziegmann C (2000) Processing technologies for the injection moulding of hybrid microstructures. Macromol Mater Eng 279:42–45

    Article  Google Scholar 

  • Michaeli W, Spennemann A, Gärtner R (2002) New plastification concepts for micro injection moulding. Microsyst Technol 8(1):55–57

    Article  Google Scholar 

  • Miller T, Fontaine J (1999) Performance and materials for high performing injection molded optical elements. In: Proceedings of the conference on plastic portable wireless electron 1999, Brookfield, CT, USA, 25–26 January 1999, pp 37–42

  • Mönkkönen K, Hietala J, Pääkkönen P, Pääkkönen E, Kaikuranta T, Pakkanen T et al (2002) Replication of sub-micron features using amorphous thermoplastics. Polym Eng Sci 42(7):1600–1608

    Article  Google Scholar 

  • Morales A, Simmons B, Wallow T, Campbell K, Mani S, Mittal B, et al (2006) Injection molded microfluidic devices for biological sample separation and detection. In: Proceedings of SPIE—the international society for optical engineering, San Jose, CA, 25–25 January 2006

  • Murakami O, Yamada K, Kotaki M (2007) Replication and optical properties of injection moldings with microstructures. In: Proceedings of the annual technical conference (ANTEC 2007), 6–11 May

  • Niggemann M, Ehrfeld W, Weber L (1998) Fabrication of miniaturized biotechnical devices. In: Proceedings of SPIE—the international society for optical engineering, Santa Clara, CA, 21–22 September 1998

  • Noerholm M, Bruus H, Jakobsen MH, Telleman P, Ramsing NB (2004) Polymer microfluidic chip for online monitoring of microarray hybridizations. Lab Chip Miniaturisation Chem Biol 4(1):28–37

    Article  Google Scholar 

  • Norajitra P, Muller K, Ruprecht R, Haußelt J (1996) Computersimulation zur Verbesserung der Wirtschaftlichkeit beim Spritzgießen von Kunststoffmikrostrukturen. In: Proceedings of Werkstoffwoche 1996, Symposium 8, DGM-Informationsgesellschaft Verlag

  • Ong N, Zhang H, Woo W (2006) Plastic injection molding of high-aspect ratio micro-rods. Mater Manuf Process 21(8):824–831

    Article  Google Scholar 

  • Ono Y, Cheng C, Jen C, Tatibouët J, Hétu J (2005) Ultrasonic technique and probes for monitoring surface imperfection of microfluidic plastic devices during injection molding. In: Proceedings of the annual technical conference (ANTEC 2005), Boston, MA, 1–5 May 2005

  • Piotter V, Hanemann T, Ruprecht R, Haußelt J (2002a) Microinjection moulding of medical device components. Business briefing: medical device manufacturing and technology 2002, pp 63–66

  • Piotter V, Mueller K, Plewa K, Ruprecht R, Haußelt J (2002b) Performance and simulation of thermoplastic micro injection molding. Microsyst Technol 8(6):387–390

    Article  Google Scholar 

  • Piotter V, Guber AE, Heckele M, Gerlach A (2004) Micro moulding of medical device components. Business briefing: medical device manufacturing and technology, 2004, http://www.touchbriefings.com/pdf/954/piotter.pdf. Accessed Feb 2007

  • Piotter V, Finnah G, Oerlygsson G, Ruprecht R, Haußelt J (2005) Special variants and simulation of micro injection moulding. Injection moulding 2005. Collected papers of the 5th international conference, Copenhagen, Denmark, 1–2 March 2005

  • Pirskanen J, Immonen J, Kalima V, Pietarinen J, Siitonen S, Kuittinen M et al (2005) Replication of sub-micrometre features using microsystems technology. Plast Rubber Compos 34(5–6):222–226

    Article  Google Scholar 

  • Pranov H, Rasmussen H, Larsen N, Gadegaard N (2006) On the injection molding of nanostructured polymer surfaces. Polym Eng Sci 46(2):160–171

    Article  Google Scholar 

  • Raviwongse R, Allada V (1997) Artificial neural network based model for computation of injection mould complexity. Int J Adv Manuf Technol 13(8):577–586

    Article  Google Scholar 

  • Reyes D, Iossifidis D, Auroux P, Manz A (2002) Micro total analysis systems. 1 Introduction, theory, and technology. Anal Chem 74(1):2623–2636

    Article  Google Scholar 

  • Rosen D, Dixon J, Poli C, Dong X (1992) Features and algorithms for tooling cost evaluation in injection molding and die casting. In: Proceedings of the ASME international computers in engineering conference and exposition, New York, NY, USA, 2–6 August 1992. ASME, New York

  • Rötting O, Röpke W, Becker H, Gärtner C (2002) Polymer microfabrication technologies. Microsyst Technol 8(1):32–36

    Article  Google Scholar 

  • Ruprecht R, Bacher W, Haußelt J, Piotter V (1995) Injection molding of liga and liga-similar microstructures using filled and unfilled thermoplastics. In: Proceedings of SPIE—the international society for optical engineering, Austin, TX, 23–24 October 1995

  • Ruprecht R, Hanemann T, Piotter V, Haußelt J (1998) Polymer materials for microsystem technologies. Microsyst Technol 5(1):44–48

    Article  Google Scholar 

  • Sammoura F, Kang J, Heo Y, Jung T, Lin L (2007) Polymeric microneedle fabrication using a microinjection molding technique. Microsyst Technol 13(5–6):517–522

    Article  Google Scholar 

  • Schneider C, Maier G (2001) Small, but potent: special plastics for injection moulding microparts. Kunsts Plast Eur 91(3):27–28

    Google Scholar 

  • Sha B, Dimov S, Griffiths C, Packianather M (2006) Micro-injection moulding: factors affecting the achievable aspect ratios. Int J Adv Manuf Technol

  • Sha B, Dimov S, Griffiths C, Packianather M (2007a) Investigation of micro-injection moulding: factors affecting the replication quality. J Mater Process Technol 183(2–3):284–296

    Article  Google Scholar 

  • Sha B, Dimov S, Griffiths C, Packianather M (2007b) Micro-injection moulding: factors affecting the achievable aspect ratios. Int J Adv Manuf Technol 33(1–2):147–156

    Article  Google Scholar 

  • Shen YK, Wu WY (2002) An analysis of the three-dimensional micro-injection molding. Int Commun Heat Mass Transf 29(3):423–431

    Article  Google Scholar 

  • Shen Y, Yeh S, Chen S (2002) Three-dimensional non-Newtonian computations of micro-injection molding with the finite element method. Int Commun Heat Mass Transf 29(5):643–652

    Article  Google Scholar 

  • Shen Y, Chien H, Lin Y (2004) Optimization of the micro-injection molding process using grey relational analysis and moldflow analysis. J Reinf Plast Compos 23(17):1799–1814

    Article  Google Scholar 

  • Shepard T, Dunn D (1995) Micro-injection molding of medical products: machine specification and process simulation. In: Proceedings of the annual technical conference (ANTEC 1995)

  • SMS Group (2006) Battenfeld Service Manual, Version MB4GBV20 10 March 2006

  • Song S, Lee KY (2006) Polymers for microfluidic chips. Macromol Res 14(2):121–128

    Google Scholar 

  • Soper SA, Ford S, Qi S, McCarley R, Kelly K, Murphy M (2000) Polymeric microelectromechanical systems. Anal Chem 72(19)

  • Soper S, Henry A, Vaidya B, Galloway M, Wabuyele M, McCarley R (2002) Surface modification of polymer-based microfluidic devices. Anal Chim Acta 470(1):87–99. 10/11

    Google Scholar 

  • Spennemann A, Michaeli W (1999) Process analysis and machine technology for the injection molding of microstructures. In: Proceedings of the annual technical conference (ANTEC 1999), 2–6 May

  • Stange T (2002) Development and production of microfluidic chips made of polymers. Am Biotechnol Lab 20(8):8–10

    Google Scholar 

  • Stewart R (2006) Nanomaterials: still climbing the steep curve of material development. Plastics Eng 12–20

  • Strassner J (2004) Precision as a competitive edge. Demagpress, 3–4

  • Sung W, Lee G, Tzeng C, Chen S (2001) Plastic microchip electrophoresis for genetic screening: the analysis of polymerase chain reactions products of fragile X (CGG)n alleles. Electrophoresis 22:1188–1193

    Article  Google Scholar 

  • Tahhan I, Blattert C, Jurischka R, Schoth A, Kerth P, Reinecke H (2005) Improved and simple sealing of microfluidic structures. In: 2005 3rd IEEE/EMBS special topic conference on microtechnology in medicine and biology, 12–15 May 2005

  • ThinXXS Microtechnology AG (2009) Available at http://www.thinxxs.com. Accessed 2009

  • Tipler P, Manser P (2001) Developments in micromoulding. In: Proceedings of polymer processing engineering 01, Bradford, UK, June 2001

  • Tolinski M (2005) Macro challenges in micromolding. Plast Eng 61(9):14–16

    Google Scholar 

  • Tom A, Layser G, Coulter J (2006) Mechanical property determination of micro injection molded tensile test specimens. In: Proceedings of the annual technical conference (ANTEC 2006), Charlotte, NC, 7–11 May 2006

  • Tosello G, Fillon B, Azcarate S, Schoth A, Mattsson L, Griffiths C, Staemmler L, Bolt P (2007) Hybrid tooling technologies and standardization for the manufacturing of inserts for micro injection molding. In: Proceedings of the annual technical conference (ANTEC 2007), 6–11 May 2007

  • Tosello G, Gava A, Hansen H, Lucchetta G (2007) Influence of process parameters on the weld lines of a micro injection molded component. In: Proceedings of the annual technical conference (ANTEC 2007), 6–11 May 2007

  • Wang Y-D, Chang P-Q, Wu Y-F, Hwang S-J, Hwang, D-Y, Cheng R-W (2005) Design and fabrication of an all-electric tiebarless injection molding machine. In: 2005 IEEE international conference on mechatronics, ICM ’05, 10–12 July 2005

  • Weber L, Ehrfeld W (1998) Molding of microstructures for high-tech applications. In: Proceedings of the 56th annual technical conference (ANTEC 1998). Part 3 (of 3), Atlanta, GA, USA, 26–30 April 1998

  • Weber L, Ehrfeld W (1998) Micro-moulding—processes, moulds, applications. Kunsts Plast Eur 1998, 88, pp 60–63, 10 Munich, Germany

  • Weber L, Ehrfeld W (1999) Micromoulding: market position and development potential. Kunststoffe 89(10):192–202

    Google Scholar 

  • Weber L, Ehrfeld W, Freimuth H, Lacher M, Lehr H, Pech B (1996) Micromolding: a powerful tool for large-scale production of precise microstructures. In: Proceedings of SPIE—the international society for optical engineering, Austin, TX, USA, 14–15 October 1996

  • Whiteside B, Martyn M, Coates P, Allan P, Hornsby P, Greenway G (2003) Micromoulding: process characteristics and product properties. Plast Rubber Compos 32(6):231–239

    Article  Google Scholar 

  • Whiteside B, Martyn M, Coates P (2004) Micromoulding: process evaluation. In: Proceedings of the annual technical conference (ANTEC 2004) Chicago, IL, 16–20 May 2004

  • Whiteside B, Martyn M, Coates P, Greenway G, Allen P, Hornsby P (2004b) Micromoulding: process measurements, product morphology and properties. Plast Rubber Compos 33(1):11–17

    Article  Google Scholar 

  • Whiteside B, Brown E, Ono Y, Jen C, Coates P (2005) Polymer degradation and filling incompletion monitoring for micromolding using ultrasound. In: Proceedings of the annual technical conference (ANTEC 2005) Boston, MA, 1–5 May 2005

  • Whitesides G (2006) The origins and the future of microfluidics. Nature 442(7101):368–373

    Article  Google Scholar 

  • Wimberger-Friedl R (2000) Injection molding of sub-μm grating optical elements. J Inject Molding Technol 4(2):78–83

    Google Scholar 

  • Wimberger-Friedl R, Balemans W, Van Iersel B (2003) Molding of microstructures and high aspect ratio features. In: Proceedings of the annual technical conference (ANTEC 2003), Nashville, TN, 4–8 May 2003

  • Xu G, Kim D, Koelling K, Lee L (2005) Flow dynamics in injection molding with microfeatures. In: Proceedings of the annual technical conference (ANTEC 2005), Boston, MA, 1–5 May 2005

  • Yao D, Kim B (2002a) Injection molding high aspect ratio microfeatures. J Inject Molding Technol 6(1):11–17

    Google Scholar 

  • Yao D, Kim B (2002b) Simulation of the filling process in micro channels for polymeric materials. J Micromech Microeng 12(5):604–610

    Article  Google Scholar 

  • Yoon S-H, Alabran M, Lee J, Mead J, Barry C, Carter D (2007) Micro-injection molding of high aspect ratio features with thermoplastic polyurethanes. In: Proceedings of the annual technical conference (ANTEC 2007), 6–11 May 2007

  • Young W (2005) Simulation of the filling process in molding components with micro channels. Microsyst Technol 11(6):410–415

    Article  Google Scholar 

  • Yu L, Koh C, Lee L, Koelling K, Madou M (2002) Experimental investigation and numerical simulation of injection molding with micro-features. Polym Eng Sci 42(5):871–888

    Article  Google Scholar 

  • Yu L, Lee L, Koelling K (2004) Flow and heat transfer simulation of injection molding with microstructures. Polym Eng Sci 44(10):1866–1876

    Article  Google Scholar 

  • Yussuf A, Sbarski I, Hayes J, Solomon M (2007) Sealing and bonding techniques for polymer-based microfluidic devices. Swinburne University of Technology, http://www.swin.edu.au/iris/pdf/profiles/AbdirahmanYussuf.pdf. Accessed March 2007

  • Zhang K, Lu Z (2008) Analysis of morphology and performance of PP microstructures manufactured by micro injection molding. Microsyst Technol 14(2):209–214

    Article  Google Scholar 

  • Zhang C, Xu J, Ma W, Zheng W (2006) PCR microfluidic devices for DNA amplification. Biotechnol Adv 24:243–284

    Article  Google Scholar 

  • Zhao J, Mayes R, Chen G, Chan PS, Xiong ZJ (2003a) Polymer micromould design and micromoulding process. Plast Rubber Compos 32(6):240–247

    Article  Google Scholar 

  • Zhao J, Mayes R, Chen G, Xie H, Chan P (2003b) Effects of process parameters on the micro molding process. Polym Eng Sci 43(9):1542–1554

    Article  Google Scholar 

  • Zhao J, Chen G, Juay Y (2007) Development of process monitoring technologies for polymer micro moulding process. Available at http://www.simtech.a-star.edu.sg/Research/TechnicalReports/TR0321.pdf. Accessed 2 March 2007

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Usama M. Attia.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Attia, U.M., Marson, S. & Alcock, J.R. Micro-injection moulding of polymer microfluidic devices. Microfluid Nanofluid 7, 1–28 (2009). https://doi.org/10.1007/s10404-009-0421-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10404-009-0421-x

Keywords

Navigation